Get Help
Starline i96, i96 Pro & Stealth
Change The Code
Emergency Code
Service Mode
Pair A Phone
How To Change Your Disarm Code
-
Switch on the ignition.
-
Disarm the system using the existing code or tag/smartphone and recieve tone.
-
Press any button on the Starline network 5 times.
-
Cycle ignition off and on.
-
5x bleeps will follow, confirming entry in the code change mode.
-
Enter the new code using the standard buttons.
-
3 seconds after the end of the new code entry, 2 bleeps will follow.
-
Enter the new code again using the standard buttons.
-
If the code matches, 2 bleeps will follow. Otherwise, a long bleep will be heard, repeat items 6,7 & 8.
-
Switch off ignition.
-
After 30 seconds... test the new code.
Notes :
-
pressing interval not more than 3 seconds. Hold the button until a confirming sound signal is heard)
-
The new owner authorization code can consists of a code sequence, containing 3 to 10 pressings of the standard buttons.
How To Pair A Phone
-
Switch on the ignition.
-
Disarm the system using the existing code or tag/smartphone and recieve tone.
-
Press any button on the Starline network 7 times.
-
Cycle ignition off and on.
-
7x bleeps will follow, confirming bluetooth discovery is enabled.
-
Open the Starline Key app and start search.
-
Select Starline i96 CAN and enter code '000000'.
-
No connnection will display on the device but you will recieve a single bleep.
-
To pair additional phones/tags repeat steps 6, 7 & 8 one at a time.
-
Once all phones/tags have been paired turn the ignition off.
-
A coresponding number of bleeps will confirm how many devices have been paired.
-
Turn on the igniton, the system will disarm and a single device will show connected.
How To Enter & Exit Valet/Service Mode
Entry
-
Switch on the ignition.
-
Disarm the system using the existing code or tag/smartphone and recieve tone.
-
Press any button on the Starline network 11 times.
-
Switch ignition off and on.
-
2x bleeps will follow, confirming entry into Valet/Service Mode.
Exit
-
Switch on the ignition.
-
Disarm the system using the existing code or tag/smartphone and recieve tone.
-
2x bleeps will follow, confirming entry into Valet/Service Mode.
Input Emergency Disarm Code
-
Take Note Of The 4 Digit Code Found In The Top Right Hand Side Of Your Starline Card. (eg.3241)
-
Switch on the ignition.
-
Press any button on the Starline network the number of times corresponding to the first digit of the code. (eg.3)
-
Pause for 1 seconds.
-
Repeat, press any button on the Starline network the number of times corresponding to the second digit of the code. (eg.2)
-
Pause for 1 seconds.
-
Repeat, press any button on the Starline network the number of times corresponding to the third digit of the code. (eg.4)
-
Pause for 1 seconds.
-
Repeat, press any button on the Starline network the number of times corresponding to the Forth digit of the code. (eg.1)
-
3 short bleeps will follow if correct. The system is now disarmed and ready to learn a new code.
-
Now follow the How To Change Your Disarm Code from step 3.